- Out-of-Stock
Novus DigiRail-2A
₹8,200.00
- Power: 10-35 Vdc
- Consumption: 50 mA
- RS485 (2-wire) Modbus RTU communication
- Sensor break detection for t/c and RTD
- Analog input resolution: 17 bits
- User defined linearization option for the analog inputs
- Accuracy (@ 25 °C): ±0.25% FS ±1°C for thermocouples, ±0.15% FS for Pt100, mV, V and mA
- Isolation: 1000 Vac/1 min from analog input to power or communications port
Security policy
Delivery policy
Return policy
The Novus DigiRail-2A Analog Input Module
The DigiRail-2A Analog Input Module signal condition and digital transmitters with Modbus RTU communication interface provide a simple way for integrating analog signal to supervisory systems. Featuring two universal input analog signal channels it is the most economical way to deliver analog input to PLC’s and SCADA systems.
The input signals are isolated from power, protecting the electrical instruments by eliminating ground loop effects. This substantially reduces undesirable interferences and instabilities in sensor measurements.
Configuration
DigiRail can be easily configured and calibrated via the digital interface by using the Windows-based DigiConfig software via the RS485 interface by using Modbus RTU commands.
The DigiConfig software allows for configuration of all DigiRail features as well as complete calibration and diagnosis. It automatically detects active devices in the Modbus network and permits configuration of all parameters.
Comments (0)
No customer reviews for the moment.
12 other products in the same category:
- Power: 10-35 Vdc
- Consumption: 50 mA
- RS485 (2-wire) Modbus RTU communication
- Sensor break detection for t/c and RTD
- Analog input resolution: 17 bits
- User defined linearization option for the analog inputs
- Accuracy (@ 25 °C): ±0.25% FS ±1°C for thermocouples, ±0.15% FS for Pt100, mV, V and mA
- Isolation: 1000 Vac/1 min from analog input to power or communications port